5: Commands and Levels
Removes the To addresses for email alerts.
Sets a domain name that will be used when connecting to
an SMTP server to
send an email alert instead of the device’s domain name
in EHLO.
<text> = domain name to override the current domain
Sets X-Priority for email alerts to 2 (high).
Sets X-Priority for email alerts to 4 (low).
Sets X-Priority for email alerts to 3 (normal).
Sets X-Priority for email alerts to 1 (urgent).
Sets X-Priority for email alerts to 5 (very low).
Sets the Reply To address for email alerts.
<text> = email address to place in the Reply To field of
Sends an email using the current settings.
Sets the port used by the SMTP server.
<number> = port used for SMTP on the server side.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays email statistics.
Sets the Subject for email alerts.
<text> = text to placed as the subject.
Sets To addresses for email alerts.
<text> = a quoted, semicolon separated list of email ad-
Stores the current configuration in permanent memory.
email 3 (email:3) level commands
Continuously displays email statistics.
Sets Cc addresses for email alerts.
<text> = a quoted, semicolon separated list of email ad-
Clears all entries from the mail log.
Sets the email counters to zero.
Enters the next lower level.
Sets the local port (used to send email alerts) to random.
Sets X-Priority for email alerts to 3 (normal).
Restores the factory default port for SMTP on the server
side.
Enters the configure email level.
Exits to the enable level.
Sets the From address for email alerts.
<text> = email address to place in the From field of the
Sets the local port used to send email alerts.
<number> local port to use for email alerts.
XPort® Pro Lx6 Embedded Device Server Command Reference 51
