5: Commands and Levels
Exits to the configuration level.
Removes the SMTP relay address.
Sets an SMTP relay address to direct all outbound email
messages through
Sets the SMTP relay port.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
syslog (config-syslog) level commands
Restores the default syslog remote port.
default severity log level
Returns to the config level.
Sets the address of the syslog recipient.
<text> = IP address or name of the host.
Removes the address of the syslog recipient.
Sets the syslog remote port.
<number> = number of the remote port used when mak-
Log only Alert and more severe events.
severity log level critical
Log only Critical and more severe events.
severity log level emergency
Log only Emergency events.
Log only Error and more severe events.
severity log level information
Log only Information and more severe events.
severity log level notice
Log only Notice and more severe events.
severity log level warning
Log only Warning and more severe events.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays the syslog statistics.
Stores the current configuration in permanent memory.
telnet (config-cli-telnet) level commands
No password required for Telnet users.
Challenges the Telnet user with a password.
Restores the default maximum allowed concurrent incom-
ing Telnet sessions.
Restores the default local port to the Telnet server.
Sets the maximum allowed concurrent incoming Telnet
XPort® Pro Lx6 Embedded Device Server Command Reference 83
