5: Commands and Levels
Stores the current configuration in permanent memory.
filesystem (filesystem) level commands
Show the contents of a file
Change the current directory to the specified directory
cp <source file> <destination file>
Show contents of a file as a hex dump
Exits to the enable level.
Format the file system and lose all data
Show all files and directories in the current directory
Show all files and directories in the specified directory
mv <source file> <destination file>
Move a file on the file system
Show file system statistics
Displays the last 20 commands entered during the current
CLI session.
Show all files and directories from current directory
tftp get <source file> <destination file> <host>
tftp get <source file> <destination file> <host> <port>
tftp put <source file> <destination file> <host>
tftp put <source file> <destination file> <host> <port>
ftp (config-ftp) level commands
Returns to the config level.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays the FTP statistics.
Stores the current configuration in permanent memory.
host 1 (tunnel-connect-host:1:1) level commands
Sets the remote host to establish tunneling connections
with.
<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
XPort® Pro Lx6 Embedded Device Server Command Reference 55
