5: Commands and Levels
Sets To addresses for email alerts.
<text> = a quoted, semicolon separated list of email ad-
Stores the current configuration in permanent memory.
enable (enable) level commands
Show interface statistics
Continuously show thread runtime information
Enters the configuration level.
Show name and number for lines.
Begin session on serial port.
Enters the CP Manager level.
Enters the configure email level.
Enters the filesystem level.
Run iperf with command line parameters passed in quot-
ed string.
Kills Telnet session with index from "show sessions"
Enters the line level.
<line> = number of the line (serial port) to be configured.
Ping destination continuously with 5 second timeout
Ping destination n times with 5 second timeout
ping <host> <count> <timeout>
Ping destination n times with x timeout (in seconds)
Ping IPv6 destination continuously with 5 second timeout
Ping IPv6 destination n times with 5 second timeout
ping6 <host> <count> <timeout>
Ping IPv6 destination n times with x timeout (in seconds)
Reload factory defaults to permanent storage
Displays the last 20 commands entered during the current
CLI session.
Show interface statistics
Show UDP/TCP state information
Show thread runtime information
Show active Telnet Sessions
Begin telnet session on network <host>.
Begin telnet session on network <host>:<port>.
Trace route to destination
trace route <host> <protocol>
Trace route to destination using TCP, ICMP, or UDP
<line> = number of the tunnel line (serial port) to be con-
XPort® Pro Lx6 Embedded Device Server Command Reference 54
