P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
8-3
8A. CHARGE AIR COOLER INSTALLA-
TION, cont’d
(H.O. KITS ONLY)
Fig. 8A-i
Fig. 8A-j
Fig. 8A-k
13mm HEADED BOLTS
NYLON PUSH PINS
15. Replace the bolts previously removed
with the four 8mm x 1.25" x 35mm long
bolts and washers provided.
16. Install the four 2A017-036 spacers (two
each side) to the bolts. (See Fig. 8A-l.)
14. Remove four inner bolts of eight 13mm
headed bolts retaining the metal bumper
support. (See Fig. 8A-k.)
13. Remove four nylon push pins from the
styrofoam bumper support and set the
support and the pins aside to be rein-
stalled. (See Fig. 8A-j.)
Fig. 8A-l
SPACERS
PROVIDED
17. Replace the styrofoam bumper support using
the factory retainers.
