A SERVICE OF

logo

P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
8-7
Fig. 8C-b
8C. CHARGE AIR COOLER INSTALLA-
TION, cont’d
(H.O. KITS ONLY)
C.
COMPRESSOR BYPASS VALVE ASSEMBLY
INSTALLATION, cont’d
2. Bypass valve #2:
a. Cut a piece of the supplied 1" heater
hose 4.5" long and a piece 15" long.
b. Attach the 4.5" piece of hose to the
inlet of the by-pass valve, securing it
with a #16 hose clamp.
4.5" x Ø1" HOSE
(TRIM TO FIT)
TO DISCHARGE
TUBE AT THE
THROTTLE BODY
15" x Ø1" HOSE
(TRIM TO FIT)
TO MANIFOLD PRESSURE/VACUUM
#16 HOSE CLAMPS
BYPASS
VALVE
TO INLET
DUCT
c. Secure the 15" piece to the by-pass
valve discharge using a #16 hose
clamp.
d. Attach the open end of the 4.5" hose
to the by-pass port on the cast dis-
charge duct and secure using a #16
hose clamp. The open end of the 15"
long hose will be attached to the inlet
duct in a later step. (See Fig. 8C-b,
8C-d.)