P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
13-2
I. Locate the supplied fuel pump and pump inlet
screen. Attach the pump inlet screen to the
pump and orient exactly as shown. (See Fig.
13-f.)
J. Secure the supplied fuel pump to the side of the
factory pump assembly using the #44 hose
clamp supplied. Verify that the hose clamp is
routed inside of the metal posts so that they can
be pushed down without restriction. (See Fig.
13-f.)
K. Slide the two supplied .75" long teflon sleeves
over the discharge of each fuel pump. (See Fig.
13-g.)
H. Using the supplied 17.0 stepless clamps and
2.75" length of Ø3/8" rubber hose, connect sup-
plied “Y” fitting to the distribution rail. (See
Fig. 13-e.)
Fig. 13-e
Fig. 13-f
Fig. 13-g
Y-FITTING
PUMP INLET
SCREEN
#44 HOSE
CLAMP
SUPPLIED
.75" LONG
TEFLON
SLEEVES
