P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
8-10
Fig. 8D-c
2. Detach the wiring harness from the retain-
ing clips and move the harness to the
shock tower. Secure the harness to the A/C
line with wire ties. (See Fig. 8D-b.)
3. Remove the small clip retaining the small
wiring harness to the shock tower. (See
Fig. 8D-b.)
4. Attach the small harness to the large har-
ness with wire ties.
5. To gain clearance for the coolant reservoir
the A/C line will need to be bent slightly
towards the passenger’s side fender. (See
Fig. 8D-b.)
6. Remove the 10mm headed screw retaining
the ground strap to the bracket on the strut
tower. (See Fig. 8D-c.)
Fig. 8D-b
8D. CHARGE AIR COOLER INSTALLA-
TION, cont’d (H.O. KITS ONLY)
D.
WIRING HARNESS RELOCATION
1. On the passenger’s side of the engine,
attached to the valve cover, is a large wire
harness. The harness will have to be relo-
cated to gain clearance for the radiator
overflow reservoir. (See Fig. 8D-a.)
Fig. 8D-a
SECURE HARNESS
WITH WIRE-TIES
BENT A/C LINE
