A SERVICE OF

logo

Publication 20D-UM002C-EN-P - November 2003
7-4 Communicating with Devices on a ControlNet Link
Step 3: Configure the daughtercard as part of the system
Use RSLogix 5000 programming software to map the 1788-CNx
communication daughtercard as part of the DriveLogix system. In the
Controller Organizer, add the communication daughtercard to the I/O
Configuration folder.
Complete your system configuration and develop your program logic. Then
download the project to the DriveLogix controller.
1. In RSLogix 5000 programming software, select the I/O Configuration folder.
2 Right-click to select New Module and add a 1788-CNx communication daughtercard.
4. Specify the slot number 1 for the communication
daughtercard.