Publication 20D-UM002C-EN-P - November 2003
A-6 DriveLogix System Specifications
DriveLogix Controller LEDs
Type Name Color State Description
Daughtercard
LEDs
PORT Green – Status of DPI port internal communications (if
present).
MOD Yellow – Status of communications module (when installed).
NET A Red – Status of network (if connected).
NET B Red – Status of secondary network (if connected).
NET A OFF No power,
Host is faulted,
Host is holding daughtercard in reset.
Red Steady Major Fault
Red Flashing Minor Fault
Green Flashing No connections established
Green Steady Connections established
NET B OFF No power,
Host is faulted,
Host is holding daughtercard in reset.
Red Steady Major Fault
Red Flashing Minor Fault
Green Flashing No connections established
Green Steady Connections established
Controller
LEDs
RUN Green Off No task(s) running.
Controller in Program mode.
Green Steady One or more tasks are running.
Controller is in Run mode.
FORCE Amber Off No forces present.
Amber Steady Forces present and enabled.
Amber Flashing Forces present but not enabled.
BATT Red Off Battery will support memory.
Red Steady Battery may not support memory - replace battery.
I/O Green Off Controller project not downloaded (the condition
after power up).
No I/O or communications configured.
Green Steady Communicating to all devices.
Green Flashing One or more devices are not responding.
Red Flashing No required I/O connections can be made, controller
is in Run mode.
RS 232 Green Off No activity.
Green Flashing Data being received or transmitted.
OK Off No power applied.
Red Flashing Recoverable fault or flash programming.
Red Steady Controller faulted.
Clear faults, clear memory, or replace the controller.
Green Steady Controller OK.
