Publication 20D-UM002C-EN-P - November 2003
A-2 DriveLogix System Specifications
Certifications:
(when product is marked)
The drive is designed to meet the following specifications:
NFPA 70 - US National Electric Code
NEMA ICS 3.1 - Safety standards for Construction and Guide for Selection,
Installation and Operation of Adjustable Speed Drive Systems.
NEMA 250 - Enclosures for Electrical Equipment
IEC 146 - International Electrical Code.
UL and cUL Listed to UL508C and CAN/CSA-C2.2 No.
14-M91
Marked for all applicable European Directives (1)
EMC Directive (89/336/EEC)
Emissions
EN 61800-3 Adjustable Speed electrical power
drive systems Part 3
Immunity
EN 61800-3 Second Environment, Restricted
Distribution
Low Voltage Directive (73/23/EEC)
EN 60204-1 Safety of Machinery - Electrical
Equipment of Machines
EN 50178 Electronic Equipment for use in Power
Installations
Category: DriveLogix 5720 DriveLogix 5720 with Memory Expansion
U
L
USC
Æ
TIP
Refer to publication 20D-UM001 for PowerFlex 700S drive
specifications. Environmental specifications for the host
drive apply to the DriveLogix controller.
IMPORTANT
The amount of memory that the software displays includes
both the user available memory and the memory reserved
for overhead. See the specifications for your controller to
determine how much memory you have available for
programming. The software might display a higher number,
but the additional memory is required by system overhead
and may not be available for programming.
