3M 700a-s Marine RADAR User Manual


 
3
Important Safeguards
Explanation of Signal Word Consequences
Indicates a potentially hazardous
situation, which, if not avoided,
could result in death or serious
injury and/or property damage.
WARNING:
Indicates a potentially hazardous
situation, which, if not avoided,
may result in minor or moderate
injury and/or property damage.
CAUTION:
This safety alert symbol identifies
important messages in this manual.
READ AND UNDERSTAND THEM BEFORE
INSTALLING OR OPERATING THIS
EQUIPMENT.
To reduce the risk associated with sharp
blade hazards:
Keep hands and fingers away from tape cutoff
blades under orange blade guards. The
blades are extremely sharp
To reduce the risk associated with fire and
explosion hazards:
Do not operate this equipment in potentially
flammable/explosive environments
To reduce the risk associated with muscle
strain:
Use the appropriate rigging and material
handling equipment when lifting or
repositioning this equipment
Use proper body mechanics when removing
or installing taping heads that are moderately
heavy or may be considered awkward to lift
WARNING (continued)
To reduce the risk associated with pinch
and entanglement hazards:
Keep hands clear of the upper head support
assembly as boxes are transported through
the machine
Keep hands, hair, loose clothing and jewelry
away from box compression rollers
Always feed boxes into the machine by
pushing only from the end of the box
Keep hands, hair, loose clothing, and jewelry
away from moving belts and taping heads
CAUTION
To reduce the risk associated with
mechanical and electrical hazards:
Read, understand and follow all safety and
operating instructions before operating or
servicing the case sealer
Allow only properly trained and qualified
personnel to operate and/or service this
equipment
Turn electrical supply off and disconnect
before performing any adjustments,
maintenance or servicing the machine or
taping heads
To reduce the risk associated with pinch
and entanglement hazards:
Do not leave the machine running while
unattended
Turn the machine off while not in use
Never attempt to work on any part of the
machine, load tape, or remove jammed boxes
from the machine while the machine is
running
To reduce the risk associated with
hazardous voltage:
Position electrical cord away from foot and/or
vehicle traffic
WARNING