3M 700a-s Marine RADAR User Manual


 
7
(Specifications continued on next page.)
Specifications
1. Power Requirements:
Electrical - 115 VAC, 60 Hz, 5.6 A
The machine is equipped with a 2.4 m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.
2. Operating Rate:
Box drive belt speed is approximately 0.4 m/s [78 feet per minute].
IMPORTANT SAFEGUARD
IMPORTANT SAFEGUARD
5. Tape Width:
36 mm [1 1/2 inch] minimum to 48 mm [2 inch] maximum
4. Tape:
Scotch
®
pressure-sensitive film box sealing tapes.
3. Operating Conditions:
Use in a relatively clean environment at 5
o
to 40
o
C [40
o
to 105
o
F] with clean, dry boxes.
Important: Machine should not be washed down.
To reduce the risk associated with fire and
explosion hazards:
Do not operate this equipment in potentially
flammable/explosive environments
WARNING