Filter
Top Products
"UniVert 2" inverter
Page 2 of 42 8000012364 BAL, en
Notes on these Operating Instructions
Duty to Provide Information
These operating instructions must be read carefully by all persons
working with or on the inverter system prior to installation and initial
start-up.
These operating instructions are a composite part of the inverter
system.
The operator of this unit is obliged to make these operating
instructions available to all personnel transporting or starting up units,
or performing maintenance or any other work on the unit.
Validity
These operating instructions comply with the current technical
specifications of the inverter system at the time of publication. The
contents do not constitute a subject matter of the contract, but serve
for information purposes only.
AEG reserves the right to make modifications with regard to contents
and technical data in these operating instructions without prior
notification. AEG cannot be held liable for any inaccuracies or
inapplicable information in these operating instructions, as no
obligation to continuously update the data and maintain their validity
has been entered into.
Warranty
Our goods and services are subject to the general conditions of
supply for products of the electrical industry, and our general sales
conditions. We reserve the right to alter any specifications given in
these operating instructions, especially with regard to technical data,
operation, dimensions and weights. Claims in connection with
supplied goods must be submitted within one week of receipt, along
with the packing slip. Subsequent claims cannot be considered.
AEG will rescind all obligations such as warranty agreements, service
contracts, etc. entered into by AEG or its representatives without prior
notice in the event of maintenance and repair work being carried out
with anything other than original AEG parts or spare parts purchased
by AEG.
Handling
These operating instructions are structured so that all work necessary
for start-up, maintenance and repair of the units can be performed by
qualified personnel.
Illustrations are provided to clarify and facilitate certain steps.
If danger to personnel and equipment cannot be ruled out in the event
of certain work, it is highlighted accordingly by pictograms explained
in chapter 1, Safety Instructions.