Filter
Top Products
"UniVert 2" inverter
Page 6 of 42 8000012364 BAL, en
1 Safety Instructions!
1.1 Important Instructions and Explanations
The instructions for operation and maintenance, as well as the
following safety regulations must be complied with to ensure the
safety of personnel as well as the availability of the unit. All personnel
installing/dismantling, starting up, operating or servicing the unit must
be familiar with and observe these safety regulations. Only qualified
personnel may perform the described work using tools, equipment,
test equipment and materials intended for the purpose and in perfect
working condition.
Important instructions are highlighted by "CAUTION:",
"ATTENTION:", "NOTE:" and indented text.
CAUTION:
This symbol identifies all working and operational procedures
requiring absolute compliance to avoid any danger to personnel.
ATTENTION:
This symbol identifies all working and operational procedures
requiring absolute compliance to prevent any damage, irreparable
or otherwise, to the INV or its components.
i
NOTE:
This symbol identifies technical requirements and additional
information requiring the operator's attention.
1.2 Accident Prevention Regulations
Compliance with the accident prevention regulations valid in the
respective country of use and the general safety regulations in
accordance with IEC 364 is mandatory.
The following safety regulations must be observed prior to any work
on the inverter system:
• disconnect the power supply,
• secure against reactivation,
• verify that the unit is disconnected from the power supply,
• earth and short-circuit the unit,
• cover or isolate any neighbouring live parts.