Filter
Top Products
14
Important! The time and date must be correctly
set in order to accurately track your dives.
Setting the time and date enables the Cobalt
to keep track of dives chronologically. The
internal clock is also used for decompression
calculations. If you travel to a different time
zone, set to the local time before diving.
Time and Date must be reset any time the
battery becomes completely discharged.
You must use the 24 hour format to initially
enter the time but the display preference can be
set to 24 hour or AM / PM. For instance; 2:00
PM in the 24 hour format would be set 14:00.
WARNING! If you are still in a state of partial
saturation following a dive, resetting to a different
time will alter your decompression calculations.
A warning will appear if you attempt to set the
time to earlier than the last saved time.
Time and Date
Main Menu
Settings Menu
Use the SELECT
button when a box is
highlighted to edit the
values. Once the digit
is highlighted in yellow,
use the UP and DOWN
buttons to increase or
decrease the number.
Press SELECT again to
accept the value and
move to the next digit
or field.
If the box is not active
(all blue, with no single
digit highlighted) the
UP and DOWN buttons
will move from box
to box.
The BACK button
saves and returns to
the previous menu.