Filter
Top Products
26
Bearing Marker
(green dot)
Selected compass
course in degrees
N, E, and W indicators
The reciprocal course
marker (red diamond)
is automatically set
at 180 degrees from
the bearing marker
(green dot).
Press the SELECT button
each time you want to
select a new course.
(Multiple courses cannot be
entered simultaneously).
Compass calibration –
The compass should be
re-calibrated to your
particular locale. Go to
Settings/Calibrate and
follow the screen prompts.
See page 8 for more details.
Compass
The compass display can be turned on during a
dive by pressing the SELECT button, and turned
off by pressing the BACK button. It will remain
displayed until you turn it off. It is a true 3D
compass and will work at any angle.
Navigation is easy. Aim the Cobalt in the
direction you want to go. When the compass
screen is on, pressing SELECT again will set a
bearing marker (green dot). As long as you keep
the green dot between the 2 markers at the
top of the compass display, you are on course.
A reciprocal course marker (red diamond, not
visible here) is also automatically set at 180°.
Follow it for your return course. Optionally
you can display additional markers at 90° and
120° by scrolling down in the course set menu
and selecting the appropriate option. The 90°
markers are red or green squares (green to the
left of your destination and red to the right of
your destination. The 120° markers are red and
green triangles.
Main Menu
Ready to Dive
Note: Do not attach any metal rings or hooks to the Cobalt unless
they are non-magnetic as it will affect the compass. We recommend
using the supplied plastic loop secured to the hose.