Filter
Top Products
41
Simulating a dive is done by pressing the
DOWN button to descend 5 feet (or one
meter) for each button press. Pressing
SELECT will then increase the dive time by
one minute with each press. Each SELECT
press will extend the dive profile being drawn
on the screen.
You can complete the dive entirely with
button presses, however to easily complete
the simulation at any time, press the BACK
button. A pop-up menu will appear, giving
you the option of saving or not saving the
dive. If you select Save, an ascent profile
will be drawn to the surface, including any
decompression stops, deep stops, or safety
stops. If any gas switch alerts are set, the gas
switches will be automatically made. The dive
will be saved in the Sim Dive Log, and you
will be returned to the Simulation Menu.
Interactive profile
showing input of depth
and time
The display updates
through the dive,
including showing
predicted gas
consumption in
Surface Cubic Feet
(or liters, if liters are
selected in the volume
preferences). If any
stops are required,
they will appear as they
would on the actual
dive screen.
Start Simulation
Main Menu
Planning
Simulation Menu