Filter
Top Products
37
Dives data is stored in the Dive Log as a series
of “snapshots” taken at the storage interval
selected in the User Preferences. Navigate
forward and back through the dive using the
UP and DOWN buttons. As you move through
the dive the dive data will update below.
Violations are indicated by a red section in
the vertical dive profile line. Pressing the
SELECT button will jump to any “event” in the
dive, such as a violation, calculating a new
decompression schedule, or a gas mixture
switch. These will be noted by abbreviations in
the STATUS area at the bottom of the screen:
Sw = gas switch
DSch = decompression schedule created
As = ascent rate violation
PO2 = PO2 limit exceeded
XSt = missed decompression stop
√St = stop completed
Ba = low battery alert issued
CNS = CNS violation
Dive Log Profile
Main Menu
Dive Log
Dive Log Summary
The Dive Log
Profile allows you to
step through the dive
in the same interval
that was used for
data storage.
Press UP to advance,
press DOWN to go
back.
The Cobalt
computer can store
approximately 600
hours of diving at
the default sample
storage rate of every
30 seconds.
The sample storage
rate can be set in the
User Preferences
screen.