Filter
Top Products
24
Always select the Ready to Dive screen
before diving. This puts Cobalt "on alert"
and improves the accuracy of recording the
beginning of a dive.
If Cobalt remains below 4 ft. (1.2m) depth for a
brief time it will begin a dive and display a no
decompression time. Once a dive is started the
Cobalt will only display the Dive Screen. Other
screens will not be accessible until the dive is
ended by remaining above 2 ft. (0.6m) depth for
two minutes.
During the dive, button functions are limited:
SELECT - compass on/set course.
BACK - compass off.
UP - If at least one Gas Switch Alert is set, UP
initiates gas switching by bringing up a list of
available mixes for which the current depth is
less than the MOD.
DOWN - step through display brightness
settings.
The Cobalt Dive
Screen is organized
into three sections.
The top section
contains calculated
values related
to time and
decompression
information.
The center section
contains current
dive information,
including the
compass display.
The bottom section
contains information
related to gas
mixtures and air
pressure.
Ready to Dive
Main Menu