Filter
Top Products
8
Compass Recalibration Procedure
Turn on the computer, go to Main Menu, Settings, Calibrate
Compass.
Step 1. Orient the Cobalt along an estimated North-South
direction. Press SELECT to
start calibration. Step 1 will
begin flashing. Rotate the
Cobalt in a North-South plane
until Step 1 stops flashing
and Step 2 begins to flash.
Step 2. Turn 90 degrees and
point the Cobalt East-West.
Rotate on its lengthwise axis
on the east-west plane, until
Step 2 stops flashing and the
compass appears.
Check the compass function
and repeat if needed. If
satisfied, select the Save
button.
Exit the calibration screen
using the BACK button.
Avoid exposing the Cobalt to strong magnetic fields. These can
alter the compass calibration. Note that diving near large metal
masses may alter the accuracy of any compass.
AC Charger USB
Cable
USB/Charger Adapter
AC
AC Side
USB
Side
USB
USB/
Charger
Terminal
Socket
and Wet
Contacts
Over
Pressure
Plug
DO NOT
TAMPER
WITH
Slot for
USB Charger
AC Charger
Cable
(Flip Adapter
over for USB)
NOTE: Always unplug the adapter from
the Cobalt when not charging or the battery will discharge.