Filter
Top Products
25
The Dive Screen
The saturation indicator at the top of the
screen changes from green to yellow to
red as saturation increases. When the first
red bars appear, you will be nearing the
end of your no-deco limit and entering a
decompression dive.
You may see an indicator requiring
Deep Stops and Safety Stops, even
though there is still no-decompression
time remaining.
All deco calculations are based upon a
30 foot per minute ascent rate. The
Ascent Rate indicator bars on the right
side of the screen will also change from
green to yellow to red as your ascent
speed increases. The Cobalt will sound
and flash SLOW! if this ascent rate is
exceeded for more than 10 seconds.
Tissue Saturation Bars
No Deco Time
Current Depth
Temperature/Time of Day
(alternating)
Gas Time Remaining
(minutes) calculated
from tank pressure
and breathing rate
PO2 (only displays if an
EAN mix is being used)
Elapsed Dive
Time
Ascent Rate Bars
Each dot
indicates 3 ft
or 1 meter
per minute
Maximum Depth
Gas Mix
Tank Pressure
Main Menu
Ready to Dive