Filter
Top Products
19
Set % O2. Enter the oxygen value between
21 (for Air) and 99 in 1% increments.
Set PO2 Alert allows you to set the PO2
limit alarm for each defined mix (values
between 1.0 and 1.6 ATM). The MOD
(maximum operating depth) will automatically
update to reflect the chosen PO2 limit.
Select Specify Tank Size as either cubic
feet @ pressure or tank volume in liters, then
enter Tank Size. Entering the correct Tank
Size for the primary mix will enable the
Cobalt computer to accurately calculate your
gas consumption.
The Cobalt only estimates gas time remaining
for the primary gas. Once a gas switch is
made underwater, the Cobalt will pause
the gas time remaining calculation until it is
switched back to the primary gas.
The Gas Mix Edit
screen allows you to
set the parameters for
the gas mixtures you
will be using.
Gas Switch Alerts
must be set if you
want to switch gases
underwater. Selecting
this option will take
you to another screen
where alerts can be
set for any gas mix
that has been defined
in the Gas/Tank
Settings screen.
If an alert is set, you
can switch gases at
any time underwater,
however an alert
will sound at the
predetermined depth.
You must manually
confirm gas switching-
it is not automatic.
Gas Mix Edit
Main Menu
Settings Menu
Gas/Tank Settings