Filter
Top Products
34
The Surface Time and
No Fly Time clocks
will begin counting.
Press the UP or
DOWN buttons to
highlight either the
View Profile (for a
detailed graphic view
of the dive profile) or
View NST (switches
to the No Stop Times
screen).
Press SELECT when
the icon is highlighted
blue to view these
other screens.
If you ascend to within 2' (0.6m) of the surface
for at least 2 minutes, the Cobalt will end
the dive and record it in the Dive Log. At
this point, the Dive Screen will change to the
Ready to Dive screen (dashes will replace the
No Deco Time). If you then press the BACK
button, or if another dive does not begin
within three additional minutes, Cobalt will
display the Post Dive screen.
The Post Dive screen summarizes all the
details from the dive including any violations,
CNS status, and OTU (oxygen toxicity units).
You can view the dive profile for this dive or the
No-Deco limits for your next dive by selecting
the View Profile or View NST icons.
If you leave this screen, you can recall the
information by going to the Dive Log and
viewing the last saved dive.
Post Dive
Main Menu
Dive Log
Dive Log Summary