Filter
Top Products
1101 and 1102 Secure Device Servers
724-746-5500 | blackbox.com
64
Figure 6-36. PuTTY Configuration screen.
In the Session menu, enter the IP address of the console server in the Host Name or IP address field.
For dial-in connections, this IP address will be the Local Address that you assigned to the console server when you set it up as the Dial-In PPP Server.
For Internet (or local/VPN connections) connections, this will be the console server’s public IP address.
Select the SSH Protocol, and the Port will be set as 22.
Go to the SSH -> Tunnels menu and in Add new forwarded port enter any high unused port number for the Source port, for example, 54321.
Set the Destination: IP details.
If your destination device is network-connected to the console server and you are connecting using RDP, set the Destination as <Managed Device IP
address/DNS Name>:3389. For example, if when setting up the Managed Device as Network Host on the console server, you specified its IP address
to be 192.168.253.1 (or its DNS Name was accounts.myco.intranet.com), then specify the Destination as 192.168.523.1:3389 (or
accounts.myco.intranet.com:3389 ). Only devices that are configured as networked Hosts can be accessed using SSH tunneling (except by the
“root” user who can tunnel to any IP address the console server can route to).