Filter
Top Products
7
Options Specifications
Immediate Taper-Down (TPN)
0 to time remaining in the infusion period,
in 10 minute increments (defaults to the
currently programmed Taper-Down)
AutoLock
Not In Use, LL1 or LL2
Time
00:00 to 23:59
Air Detector
Turned On or Turned Off
Event Log
0 to 500 events
Extended History
Up to 48 hours in 1 hour increments
Biomed Toolbox Specifications
Micrograms
On or Off
Extended History
On or Off
Max Dose per Hour
On or Off
(PCA software rev. 6210G or higher only)
PM (Preventive Maintenance) Reminder
1 to 24 months in 1 month increments,
Not In Use
Custom Lock Level Code
Date Format
US Standard (mm/dd/yy) or European
Standard (dd/mm/yy)
Power Source Display
Always display or only Low Battery
Upstream Sensor
On or Off
(Model 6101 only)
Air Detector Required
Required or Not Required
Compatible Reservoirs and
Administration Sets
• 50-ml or 100-ml Medication Cassette reser-
voir, used with the CADD
®
extension set
with anti-siphon valve.
• CADD
®
administration set with integral
anti-siphon valve, with or without bag spike
(allows use of flexible plastic bag or sterile vial
with injector)
• CADD
®
administration set with add on anti-
siphon valve and bag spike (allows for gravity
priming before attaching the add on anti-
siphon valve)
• CADD-Prizm
®
high volume administration set
with add on anti-siphon valve, with or without
air-eliminating filter
Remote Dose Cord
Deltec provides a Remote Dose Cord for the PCA
delivery mode, which is an extension of the
DOSE key. The push button switch is a Single
Pole Double Throw (SPDT) which operates in the
same manner as the DOSE key. When the Re-
mote Dose Cord is attached to the pump, the
patient may press either the Remote Dose button
or the DOSE key to receive a Demand Dose. The
clinician may also use either the Remote Dose
button or the DOSE key to deliver a clinician
bolus. For easy access, the Remote Dose cord
may be fastened to the patient’s clothing or
bedsheet with the attached clip.
NOTE:
To detach the Remote Dose cord from the
pump, grasp the Remote Dose cord connector
and pull back using a straight, steady motion.
Do not twist or turn the connector, or use any
instrument to remove it.
For additional specifications refer to the
Operator’s Manual provided with the product.