Filter
Top Products
I.B. 29C892B
Page 7
Effective 8/99
changes to memory as previously described. In addition,
the Select pushbutton by itself causes the programmer to
select a particular category indicated by the blinking cur-
sor and move further into that particular selected menu.
Up-Arrow Pushbutton
The Up-Arrow pushbutton is used to move the blinking
cursor back to the first selection Select Address (SA)
when the programmer is displaying the top level menu
(Figure 2-9). It is similar to the Escape Key of a PC. If
the programmer is displaying a lower level menu, use of
this pushbutton moves the display back one menu level,
eventually ending at SA.
Right-Arrow Pushbutton
The Right-Arrow pushbutton moves the blinking cursor
horizontally to the right in the display from category to
category. Continued use of this pushbutton will wrap
around and eventually return to the starting category.
Left-Arrow Pushbutton
The Left-Arrow pushbutton performs the same function
as the previously described Right-Arrow pushbutton
except movement of the blinking cursor is horizontally to
the left.
2-3.4 EDIT VALUES PUSHBUTTONS
(Figure 2-10)
Up Pushbutton
The Up pushbutton is used to edit already programmed
values and/or selections. Use of this pushbutton
increases the value and/or selection presently pro-
grammed. When this pushbutton is held depressed, the
displayed values scroll at a more rapid rate. Eventually,
the display will wrap around to the original starting point.
Figure 2-8 View Functions Pushbuttons
Figure 2-10 Edit Values Pushbuttons
Figure 2-9 Top Level Main Menu Display
<SA FI ID BA>
SELECT ADDRESS