Filter
Top Products
1. HOW TO INSTALL THE SYSTEM
1-11
Flush mount
Use the optional flush mount kit to mount the sub control unit.
1. Prepare a cutout in the mounting location referring to the outline drawing at the
back of this manual.
2. Set the unit to the cutout.
3. Attach the mounting plate to the unit with four screws from the rear side.
4. Screw the wing screw to each mounting plate and then insert hex bolt to each wing
screw.
5. Fasten each wing screw and then fasten the hex nuts.
Name Type Code No. Qty
Mounting plate 03-163-7531 100-306-261 4
Hex nut M5 000-863-108 4
Wing screw M5x40 000-162-682-10 4
Pan head screw M4x12 000-163-192-10 4