Filter
Top Products
2. WIRING
2-14
2.6.4 Connections inside the Transceiver Unit
Connect the cables from the transducer referring to cable no. labeled on the chassis
and connector no. labeled on each pc board. Connector is locked properly when you
hear a “click” sound. For the cable 10S2078 from the control box of the hull unit con-
nect the longer, peeled portion of the cable to the transceiver unit.
Note: To remove or insert a TRX board when the transducer cable is not connected,
lock the catch on the transducer cable connector (HIF connector) of that TRX board
so that it won’t contact the board release tab.
Satellite Compass
Hull Unit (10S2078)
IF Unit
(10S2380)
TB-B101
CN-B102
CN-B101
Processor Unit
(FR-FTPC-CY)
CN-B103
TRX-16
P2
(64 pin)
P1
(64 pin)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Fix cables
with clamps.
Fasten shield with
steel clamp.
10S2320
Clamp for transducer cables
Arrange transducer cables as shown above and
fix them with clamp.
Cable
No.
Power
Fix cables
with clamps.
TRX-1
NET100 Board
(NETWORK port)