Filter
Top Products
2. WIRING
2-13
How to position guide pins
Use the guide pin insertion tool (Code No. 10-910-0179-0) to correctly insert guide
pins to connectors.
2.6.2 Power cable
Use the power cable DPYCYS-2.5 (or equivalent).
2.6.3 Satellite Compass
Connect a satellite compass to CN-B103 in the transceiver unit, with the cable TTYC-
SLA-1.
Guide pin
Guide pin B (small)
Guide pin A (large)
1
1
CN-B101
(Guide pin insertion tool, notch in head)
Tool
Connector
Vinyl sheath
Anti-corrosive
sheath
Crimp-on lug
FV2-4 (2 pcs.)
35
30
Set armor in cable clamp.
140
Dimensions in
millimeters
30 300 5
Braided shield
Twist
Wire
Procedure:
1. Twist core.
2. Insert terminal opener and push.
3. Insert wire into hole.
4. Release terminal opener.
5. Pull wire to confirm it is correctly inserted.
Terminal opener
Push
How to connect wires to WAGO connector
TTYCSLA-1 (Four core twisted)
Armor
Sheath
Shield
Conductor
S=0.75 mm
2
φ=1.11 mm
φ=10.8 mm