Filter
Top Products
2. WIRING
2-4
2.3 Processor Unit
Connect the cables of other equipment at the rear of the processor unit.
Power cable
Connect the power cable (DPYC-6, L=5 m, local supply) as follows:
1. Process the cable as shown below.
2. Open the power terminal cover on the processor unit. Connect the power cable:
top terminal(#1), +; bottom terminal(#2), -.
3. Close the power terminal cover.
Ship’s ground
Ground wire
IV-8sq.
12-24 VDC
DPYC-6
External speaker for PC
(w/amp, less than 5W)
10S2383, 3 m
FR-FTPC-CY,
within 100 m
IF Unit
(FSV-8502)
Transceiver Unit
(FSV-851A)
External Monitor (SXGA)
DVI-D/D SINGLELINK,
5 m or 10 m
IF Unit
(FSV-8502)
10S1050, 3 m
Sub control unit FSV-853
(option)
USB cable
47
3
7
20
1
20
5.5
8 to 12
Sheath
Armor
Cut sheath.
Vinyl tape
Remove paint.
Crimp-on lug (local supply)
Power terminal
cover
Power terminal