Filter
Top Products
1. HOW TO INSTALL THE SYSTEM
1-12
1.4 Transceiver Unit
The length of the cable between the transceiver unit and the hull unit is 10 m (stan-
dard), so select a mounting location within 5 m of the hull unit. The transceiver unit
should be fixed to a mounting base (shipyard supply) whose dimensions are as shown
in the outline drawing at the back of this manual. Reinforce the transceiver unit against
vibration by stays extending from the eye-bolts on the top of the unit. Fasten four bolts
(M12, local supply) at the bottom of the transceiver unit to fix the unit to the mounting
base.