Filter
Top Products
3. ADJUSTMENTS AND CHECKS
3-6
3.6 Others Menu
The [Others] menu sets the equipment according to the external equipment connect-
ed.
3.6.1 Interface Setting menu
NMEA1/2 Baud Rate: Set the transmission rate for the NMEA 1 and NMEA 2 ports.
(4800 bps, 9600 bps, 19200 bps, 38400 bps)
CIF1/2 Baud Rate: Set the transmission rate for the CIF 1 and CIF 2 ports. (2400 bps,
4800 bps, 9600 bps, 19200 bps)
Sensor Baud Rate: Set the transmission rate of the satellite compass, which is con-
nected to the transceiver unit. For a FURUNO satellite compass, select 38400. (4800
bps, 9600 bps, 19200 bps, 38400 bps) Set the NMEA output format for the satellite
compass as follows: - Output format: IEC ed1 - Sentence: ATT, HVE (disable all other
sentences except those two) - Baud rate: 38400 bps - Interval: 25 ms (Any talker)
EXT KP Input: Set the input logic of KP from external equipment. (Disable, Enable)
Disable: Disable external KP. Enable: Use KP from external equipment.
EXT KP Output: Select the KP output logic. (Positive, Negative)
PC Connection: Select whether a PC is connected or not. (Enable, Disable)