Filter
Top Products
12-9
12.6 Verifying Program Version No.
The procedure which follows shows how to verify the program ver-
sion no. of both the plotter section and the GPS section (GP-3300).
Plotter section
1. Press the [MENU] key.
2. Press the [8] key select INITIAL SETTINGS.
The plotter program number and its version number appear at the
bottom of the display. The extreme right two digits are the ver-
sion number.
8 INITIAL SETTINGS
SELF TEST : OK
PROGRAM NO. : 14517020 xx
Program no. of
plotter section
xx : Version number
Figure 12-7 INITIAL SETTINGS menu, showing
location of plotter secttion program number
GPS section (GP-3300)
3. Press [↑] to select PAGE CHANGE (TO GPS INITIAL SET-
TINGS).
The GPS section program number and its version number appear
at the bottom of the display. The extreme right two digits are the
version number.
8 INITIAL SETTINGS
: SELECT ITEM
: SELECT PARAMETER
PROGRAM NO. : 48501050 xx
Program no. of
GPS section
xx : Version number
Figure 12-8 GPS INITIAL SETTINGS menu, showing
location of GPS section program number