Filter
Top Products
4-6
4. Press the [ENT] key. (If you enter a wrong character, set the data
input cursor on wrong character and then enter correct character.)
5. Repeat steps 2 and 3 to complete comment.
6. Press [→] to set the cursor out of the comments column and then
press the [ENT] key.
4.3 Turning Specific Waypoint Displays On/Off
Turning on/off specific waypoints displays through
the REGISTER WAYPOINT menu
1. Press the [WPT] key to display the REGISTER WAYPOINT
menu.
REGISTER WAYPOINT
MODE = CURSOR L/L OS POS. R/B LIST
WPT NO. = − −
ENTER WAYPOINT NO., AND DESIGNATE WAYPOINT
POSITION BY USING CURSOR.
Figure 4-7 REGISTER WAYPOINT menu
2. Select L/L from the MODE field.
3. Select WPT NO.
4. Press [-] (turn off) or [+] (turn on), enter waypoint number to turn
on/off.
5. Press the [ENT] key.