Filter
Top Products
4-8
Deleting waypoints through waypoint list
1. Press the [MENU] key followed by the [1] key to display the
WAYPOINT list.
2. Select the waypoint you want to delete.
3. Press the [CLR] key.
4. To delete another waypoint, repeat steps 2 and 3.
5. Press the [ENT] key.
Deleting external waypoint (99)
1. Cancel destination waypoint on connected navigation aid.
2. Display the cursor and operate the trackball to place the cursor on
waypoint 99.
3. Press the [CLR] key.
4.5 Destination Waypoint
By setting a destination waypoint, you can find the range and bearing
from your vessel to a latitude and longitude position. You can set a
destination waypoint by cursor, waypoint number, range and bear-
ing, and route number. (Route number is a special method so it is
dealt with in a later section.)
Setting destination waypoint by cursor
1. Press the [FR/TO] key to display the DESTINATION SETTING
menu.
DESTINATION SETTING
DEST = SET CANCEL
MODE = CURSOR WAYPOINT ROUTE R/B
SELECT DESTINATION BY USING CURSOR AND PRESS ENT.
INTERMEDIATE POINTS CAN BE SET BY USING + KEY.
Figure 4-9 DESTINATION SETTING menu
2. Select CURSOR from the MODE field.