Filter
Top Products
Marking Your Present Location
Use the ENTER/MARK key to capture your present location to
create a new waypoint. You must have a valid position (2D or 3D)
x to mark your present location.
To mark your present location:
1. Press and hold the ENTER/MARK key until the New
Waypoint Page opens, then release it. A default four-digit
name and symbol are assigned for the new waypoint.
New Waypoint Page
2. To accept the waypoint with the default information, highlight
OK, and press ENTER.
To change any information on the New Waypoint Page,
highlight the appropriate eld, and press ENTER. After
entering and conrming your changes, highlight OK, and
press ENTER.
Creating Waypoints Using the Map
You can quickly create a waypoint using the Map Page. When
you pan the map and move the arrow over a map item, you see a
highlighted description of that item. The GPSMAP 378/478 uses the
map item text shown on the map as the default name and symbol for
the new waypoint.
To create a new waypoint using the Map Page:
1. Use the ROCKER to move the arrow to the map location or
map feature you want.
2. Press and quickly release ENTER/MARK to capture the
location of the arrow. Pressing and holding ENTER/MARK
marks your current location, not the arrow’s location.
If you have highlighted a map feature, an information page
opens after you press ENTER. Highlight Save, and press
ENTER to save the item as a waypoint. The New Map
Waypoint Page opens.
3. To accept the waypoint with the default information, highlight
OK, and press ENTER.
To change any information on the New Map Waypoint Page,
highlight the appropriate eld, and press ENTER. After
entering your changes, highlight OK, and press ENTER.
GPSMAP 378/478 Owner’s Manual 25
MArIne Mode > creAtIng And usIng WAyPoInts