Filter
Top Products
EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL 15–109
EPM 5300 Series Meters
Chapter 15: Programming
Quick Reference
GE Consumer & Industrial
Multilin
Programming Quick Reference
15.1 Entering the Programming Mode
Z Hold PHASE/NEXT key and press AMPS key.
Display blanks and shows either a ‘0’, ‘1’, or ‘3’.
Z If ‘3’ is not displayed, press AMPS key until ‘3’ is displayed.
Z Release AMPS key
Z Press PHASE/NEXT key, while ‘3’ is still displayed.
Display shows ‘333’ momentarily.
Upper display starts counting.
Z Press PHASE/NEXT key when ‘5’ is displayed to register the ‘5’.
Z Repeat step 6 until ‘555’ has been registered.