Filter
Top Products
CHAPTER 9: PROGRAMMING GROUP 0 - GLOBAL METER SETUP GROUP 0, FUNCTION 6—KYZ PARAMETER SELECTION
EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL 9–67
9.8 Group 0, Function 6—KYZ Parameter Selection
Note
FUNCTION 6 applies only if Option -NL or -NL2 was ordered.
OPTION -NL: This option gives the meter 2 Relays and one KYZ pulse. The KYZ pulse can be
programmed to the below features.
Select a single parameter from Table 9-5 according to the EPM 5300P model being
programmed.
OPTION -NL2: This option offers 3 distinct KYZ pulses instead of Relays.
Only three separate parameters may be selected: FUNCTION 6.0 (KYZ Port 0), FUNCTION
6.1 (KYZ Port 1), and FUNCTION 6.2 (KYZ Port 2). The available parameters vary according to
the EPM 5300P model being programmed. For exact port positions see Installation
Sections.
APPLICABLE SELECTIONS: 5300P - +WH, -WH, VAH
5300P - +WH, -WH, +VARH, -VARH
To perform the KYZ Parameter Selection:
Note
Press MAX/MIN/LIMITS at any time to cancel before storing the last digit or switch.
Table 9–1: KYZ Parameters
Parameter Description
0 Disable KYZ
1 Positive Watt Hour KYZ
2VA Hour KYZ
3 Negative Watt Hour KYZ
4Positive VAR Hour KYZ
5 Negative VAR Hour KYZ