Filter
Top Products
9–60 EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL
MODBUS PLUS CAPABILITY CHAPTER 9: PROGRAMMING GROUP 0 - GLOBAL METER SETUP
9.4 Modbus Plus Capability
When using the MPI Modbus Plus adapter, the meter values should be set to speak to
Modbus RTU with a meter address of 0001 and a baud rate of 9600 baud. The Modbus Plus
address is programmed into the MP1 Modbus Plus adapter directly.
9.4.1 Printing Option
To print, access Mode 1 and Mode 2 (see Part I: Installation and Operation). Printing serial
options should be disabled when using a multimeter communications connection RS485.
DISABLING PREVENTS:
1. Printing through the keypad.
2. Corrupting data at a computer terminal while multiple meters poll.
3. Corrupting printing commands through communications.
This option connects a serial printer to the RS232 port and prints the data. Disable this
feature when the meter is not using an RS232 port (i.e., when RS485 or DC outputs are
being used).