Filter
Top Products
9 - 2
Test Menu
When you scan the Test Menu On code, then scan a programming code in this manual, the scan engine displays the content of
a programming code. The programming function will still occur, but in addition, the content of that programming code is output
to the terminal.
Note: This feature should not be used during normal scan engine operation.
TotalFreedom
TotalFreedom is an open system architecture that makes it possible for you create applications that reside on your scan engine.
Decoding apps and Data Formatting apps can be created using TotalFreedom. For further information about TotalFreedom, go
to our website at
www.honeywellaidc.com.
Application Plug-Ins (Apps)
Any apps that you are using can be turned off or on by scanning the following bar codes. Apps are stored in groups: Decoding,
and Formatting. You can enable and disable these groups of apps by scanning that group’s On or Off bar code below. You can
also scan the List Apps bar code to output a list of all your apps.
Note: You must reset your device in order for the apps setting to take effect.
On
* Off
* Decoding Apps On
Decoding Apps Off
* Formatting Apps On
Formatting Apps Off
List Apps