Honeywell 5610/5613 Marine Radio User Manual


 
3 - 7
Streaming Presentation Mode
When in Streaming Presentation mode, the scan engine’s aimer goes out after a short time, but the scan illumination remains
on all the time to continuously search for bar codes. Two modes are available, Normal and Enhanced. Normal mode offers
good scan speed and the longest working ranges (depth of field). Enhanced mode will give you the highest possible scan
speed but slightly less range than Normal mode. Enhanced mode is best used when you require a very fast scan speed and
don’t require a long working range.
When using Preferred Symbology (page 3-12), a lower priority symbol must be centered on the aiming pattern to be read in
Streaming Presentation Mode.
Mobile Phone Read Mode
When this mode is selected, your scan engine is optimized to read bar codes from mobile phone or other LED displays. How-
ever, the speed of scanning printed bar codes may be slightly lower when this mode is enabled. You can enable Mobile Phone
Reading for either a hand held device, or for a hands-free (presentation) application.
Note: To turn off Mobile Phone Read Mode, scan a Manual or Serial Trigger Mode bar code (see page 3-5).
Image Snap and Ship
Image Snap and Ship tells the engine to take a picture (rather than read a bar code) when the trigger is pressed. Once the pic-
ture is snapped, it is shipped to the host system as a jpeg file by default. To revert to bar code reading, you must change to a
different trigger mode (see Manual Trigger Modes beginning on page 3-5).
Note: You must send a serial command for Manual Trigger Modes (see page 3-5) in order to use menu codes after using Image
Snap and Ship
Streaming Presentation Mode
- Normal
Streaming Presentation Mode
- Enhanced
Hand Held Scanning - Mobile
Phone
Streaming Presentation -
Mobile Phone
Image Snap and Ship