Honeywell 5610/5613 Marine Radio User Manual


 
2 - 3
USB Serial
Scan the following code to program the scan engine to emulate a regular RS232-based COM Port. If you are using a Mic-
rosoft® Windows® PC, you will need to download a driver from the Honeywell website (www.honeywellaidc.com). The
driver will use the next available COM Port number. Apple® Macintosh computers recognize the scan engine as a USB
CDC class device and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
ACK/NAK Mode
Verifone
®
Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scan engine for a Verifone Ruby terminal. This bar code sets the
baud rate to 1200 bps and the data format to 8 data bits, no parity bit, 1 stop bit. It also adds a line feed (LF) suffix and pro-
grams the following prefixes for each symbology:
Symbology Prefix
UPC-A A
UPC-E A
EAN-8 FF
EAN-13 F
USB Serial
CTS/RTS Emulation On
* CTS/RTS Emulation Off
ACK/NAK Mode On
* ACK/NAK Mode Off
Verifone Ruby Settings