Honeywell 5610/5613 Marine Radio User Manual


 
6 - 1
6
Symbologies
This programming section contains the following menu selections. Refer to Chapter 10 for settings and defaults.
All Symbologies
If you want to decode all the symbologies allowable for your scanner, scan the All Symbologies On code. If on the other hand,
you want to decode only a particular symbology, scan All Symbologies Off followed by the On symbol for that particular sym-
bology.
Note: When All Symbologies On is scanned, 2D Postal Codes are not enabled. 2D Postal Codes must be enabled separately.
Message Length Description
You are able to set the valid reading length of some of the bar code symbologies. If the data length of the scanned bar code
doesn’t match the valid reading length, the scanner will issue an error tone. You may wish to set the same value for minimum
and maximum length to force the scanner to read fixed length bar code data. This helps reduce the chances of a misread.
EXAMPLE: Decode only those bar codes with a count of 9-20 characters.
Min. length = 09Max. length = 20
All Symbologies Interleaved 2 of 5
•Aztec Code •Korea Post
China Post (Hong Kong 2 of 5) Matrix 2 of 5
Chinese Sensible (Han Xin) Code MaxiCode
Codabar MicroPDF417
Codablock A MSI
Codablock F NEC 2 of 5
Code 11 Postal Codes - 2D
Code 128 Postal Codes - Linear
Code 32 Pharmaceutical (PARAF) PDF417
Code 39 GS1 DataBar Omnidirectional
Code 93 QR Code
Data Matrix Straight 2 of 5 IATA (two-bar start/stop)
EAN/JAN-13 Straight 2 of 5 Industrial (three-bar start/stop)
EAN/JAN-8 TCIF Linked Code 39 (TLC39)
GS1 Composite Codes Telepen
GS1 DataBar Expanded Trioptic Code
GS1 DataBar Limited UPC-A
GS1 DataBar Omnidirectional UPC-A/EAN-13 with Extended Coupon Code
GS1 Emulation UPC-E0
•GS1-128 •UPC-E1
All Symbologies On
All Symbologies Off