Filter
Top Products
3 - 1
3
Input/Output Settings
Power Up Beeper
The scan engine can be programmed to beep when it’s powered up. Scan the Off bar code(s) if you don’t want a power up
beep. Default = Power Up Beeper On - Scanner.
Beep on BEL Character
You may wish to force the scan engine to beep upon a command sent from the host. If you scan the Beep on BEL On bar code
below, the scan engine will beep every time a BEL character is received from the host. Default = Beep on BEL Off.
Trigger Click
To hear an audible click every time the scanner trigger is pressed, scan the Trigger Click On bar code below. Scan the Trigger
Click Off code if you don’t wish to hear the click. (This feature has no effect on serial or automatic triggering.) Default = Tr i g ge r
Click Off.
Power Up Beeper Off -
Scanner
* Power Up Beeper On -
Scanner
*Beep on BEL Off
Beep on BEL On
*Trigger Click Off
Trigger Click On