Filter
Top Products
Bottom Range
(Sonar Zoom View only, when Bottom Lock is On)
Bottom Range allows you to control how much of the water column, measured up from the bottom, is
shown in the Sonar Zoom View. Choose a small value to see low-lying bottom structure or details of the
bottom return. Choose a larger value to see large structure in deeper water. It is possible to set the Bottom
Range to be greater than the depth. In this case, you may see surface clutter in a wavy band that mirrors
changes in the depth.
T
o adjust the Bottom Range:
1. In the Sonar Zoom View, highlight Bottom Lock on the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Lock setting to on. (Off,
On, Default = Off).
3. Once you turn on Bottom Lock, the Bottom Range X-Press™ menu choice will be displayed. (10 -
60 feet or 3-20 meters [International Models only], Default = 15 feet)
Sonar Colors
Sonar Colors allows you to select which color palette you would like to
use for the display.
To change the Sonar Colors:
1. Highlight Sonar Colors on the Sonar X-Press™ menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the color palette. (Standard, Gray,
Inverse, Green, Default = Standard)
Cancel Navigation
(only when Navigating)
Cancel Navigation discards the current route and exits Navigation Mode. This menu choice will only
appear when you are currently navigating a route. This will not delete a previously-saved route.
T
o Cancel Navigation:
1. Highlight Cancel Navigation on the Sonar X-Press™ menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.
3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT Cursor key once more.
To avoid canceling navigation, press the LEFT Cursor key.
113
531617-1_A - 1197c_ManE.qxp 11/6/2007 4:39 AM Page 113