Restore Defaults
Restore Defaults resets ALL menu settings to their factory defaults.
Use this menu choice with caution!
T
o Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor key once
more. To cancel Restore Defaults, press the LEFT Cursor key.
Select Readouts
(Advanced)
Select Readouts sets individual digital readouts on all the views that can
display readouts. This feature allows you to select what information will be
displayed in each of a variable number of fixed-position readouts arranged at
the bottom of the screen, or whether a particular readout will be turned off,
displaying nothing in that area. Readout positions can also display information
from supported accessories such as Temp/Speed.
Data windows can display readouts from supported accessories such as a
Speed accessory. Each data window can either be empty (Off) or contain one of
the following:
• Course • Time
• Depth • Time + Date
• Off • Triplog
• Position • Voltage
• Aux. Temperature • Temperature
• Speed • Water Speed
NOTE: All views share the same set of 5 readouts that can be set one way for navigation mode using Select Nav
Readouts, and another way for non-navigation mode using Select Readouts. Non-navigation readouts are
automatically replaced on the display when navigating. However, Navigating readouts can have any type of
information in them allowing you to see navigation, or standard information while navigating.
Select Readouts
157
531617-1_A - 1197c_ManE.qxp 11/6/2007 4:39 AM Page 157