Filter
Top Products
Setup Menu Tab
From any view, press the MENU key twice to
access the tabbed Main Menu System, then
press the RIGHT cursor key until the Setup
tab is selected.
NOTE: Menu choices will vary depending on
system settings such as whether the unit is set
for Advanced User mode and what accessories
are attached to the control head.
Units - Depth
Units - Depth selects the units of measure
for all depth-related readouts.
T
o change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Units - Depth setting. (Meters [International models only], Feet,
Fathoms; Default is Meters for International models, and Feet for
Domestic models)
Units - Temp
(International only)
Units - Temp selects the units of measure for all temperature-related
readouts. International models only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Units - Temp setting. (Celsius, Fahrenheit; Default = Celsius)
Setup Menu
102