Filter
Top Products
Water Type
(Advanced)
Water Type configures your unit for operation in fresh or salt water. The
Water Type menu choice is available when User Mode is set to Advanced
(see Setup Menu Tab: User Mode).
NOTE: In salt water, what would be considered a large fish might be 2 to 10
times bigger than a large fish in fresh water (depending on the type of fish you
are seeking). The salt water setting allows for a greater range in fish size
adjustment to account for this. Also, make sure that the Water Type is set
accurately, especially in salt water, as this affects the accuracy of deep water
depth readings.
To change the Water Type setting:
1. Make sure you are in Advanced User Mode, then highlight Water
Type on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Water Type setting. (Fresh, Salt, Default = Fresh)
Transducer Select
Transducer Select allows you to select
which transducer you want to use.
NOTE: The transducer setting must correspond to the transducer type connected
to your system.
NOTE: The QuadraBeam PLUS™ transducer is standard on the 957c Combo, but
is optional-purchase only for the 917c Combo.
To change the selected Transducer:
1. Highlight Transducer Select on the Sonar Main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
transducer selected. (917c Combo: Quad Beam, Dual Beam, Universal
Sonar 2, Default = Dual Beam; 957c Combo: Quad Beam, Dual Beam,
Dual 50/200, Universal Sonar 2, Default = Quad Beam)
Color Bar
Color Bar allows you to display or suppress
the display of the color bar shown in the full screen Sonar View.
To change the display of the Color Bar:
1. Highlight Color Bar on the Sonar Main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
display of the color bar. (Off, On, Default = On)
86