Filter
Top Products
Triplog Reset
(with Speed input only)
Triplog Reset resets the Triplog to zero. The Triplog provides the following
information: timer for elapsed time, distance traveled since last reset, and
average speed.
T
o Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the
RIGHT Cursor key once more. To cancel Reset Triplog, press the LEFT
Cursor key.
Restore Defaults
Restore Defaults resets ALL menu settings
to their factory defaults. Use this menu choice with caution!
T
o Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring
defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the
RIGHT Cursor key once more. To cancel Restore Defaults, press the
LEFT Cursor key.
Select
Readouts
(Advanced)
Select Readouts allows you to customize the
information displayed in individual digital readouts on
the left side of many views, including suppressing a
particular readout so that nothing is displayed; the
ability to customize readouts depends on the view
and whether you are navigating. This Advanced
feature allows you to select what data will be
displayed in each of 5 fixed-position data windows
arranged at the left edge of the Sonar View screen, or
whether a particular data window will be turned off,
displaying nothing in that area; you can access this
menu choice only when in Advanced User Mode (see
Setup Menu Tab: User Mode.)
Data windows can display readouts from supported accessories such as a
Speed accessory. Each data window can either be empty (Off) or contain one
of the following:
• Course • Time
• Depth • Time + Date
• Off • Triplog
• Position • Voltage
• Aux. Temperature • Temperature
• Speed • Water Speed
Select Readouts
104